|
|
|
Protected Pressure Gauge
Accurately measure the grout pump discharge pressure.
Available for 1" and 1 1/4" hose sizes and various discharge pressures.
Equipped with hose couplings to easily snap into the grout line.
The gauge is protected from grout contamination by an diaphragm seal.
Ranges 0-30, 0-100, 0-300 & 0-600 psi. Bar & kPa gauges available.
|
High Pressure Gauge
Accurately measure the grout pump discharge pressure.
Available for 1" and 1 1/4" hose sizes and various discharge pressures.
Equipped with hose couplings to easily snap into the grout line.
The gauge is protected from grout contamination by an diaphragm seal.
1" locking stainless steel camlocks. Ranges 0-1500, 0-2000, 0-3000
psi.
|
Inline Protected Pressure Gauge
Non-clogging pressure sensor is the ideal way to protect
instrumentation and ensure accurate, dependable pressure measurement.
Utilizing a full 360 degree circumferential diaphragm, this flow thru design
assures complete isolation of the instrumentation from process material,
thus preventing clogging, and can be flushed clean without removal or disassembly.
The Protected Gauge Assembly is complete as shown including 1" camlock
fittings, and is available for all ChemGrout equipment with working pressures
of up to 1000 psi.
|
|
|
|
|
Fill-Rite Water Meters
Accurately measures water improving batch quality and productivity.
Available flow rates 20 GPM & 40 GPM. Weatherproof and corrosion
resistant this meter is totalizing and resettable. Equipped with
inlet strainer, mounting bracket and manual shut off valve, available in
20 and 40 GPM flow rates. |
Neptune Water Meters
Accurately measures water, improving batch quality and productivity.
Two styles available: Manual shut off with totalizing and resettable
dial. Automatic shut off with totalizing and resettable dial.
Equipped with inlet strainers, discharge hose and shut off valve.
|
Magnetic Grout Flow Meter
Designed to measure the flow rate at a convenient location
between the grout pump and the point of injection. The ChemGrout
flow meters are preconfigured to suit the customer requirements for units
of measure and flow ranges.. Includes digital display, resettable totalizer,
4-20mA output signal and protective stand. |
|
|
|
|
Grout Hose
Heavy duty, grout hose with abrasion resistance lining.
Equipped with internally expanded ends and quick disconnect fittings that
eliminate pressure build up. Available in 1", 1 1/4", 1 1/2" and
2" I.D. Working pressures up to 500 PSI. High pressure
hose has 1000 PSI working pressure. |
Grout Spray Wand
Multi-Purpose Spray Wand allows the applicator accurate control
of the spray pattern and density. Equipped with grout hose coupling
with swivel, air hose fitting with ball valve, needle valve for precise
air control, 6 different orifice sizes, and rubber cap for safety.
|
Compact Spray Wand
Designed for spraying repair mortar type materials in confined
areas with minimal access. Unique nozzle design injects air for a
smooth spray pattern. Equipped with grout hose coupling, air hose
fitting and air control valve. Available for 1" and 1 1/4" hose couplings.
|
|
|
|
Drive Packer
Designed for easy insertion and removal from the injection
hole for slabjacking and voidfilling. Inserts into a 1" drilled hole.
Comes complete with hose coupling, reinforced drive head and shut off valve.
Available for 1" and 1 1/4" hose fittings.
|
Mechanical Surface Grout Packers
Designed to connect the grout hose to sound material for
slabjacking, voidfilling. Comes complete with hose coupling, shut
off valve , spinner and expandable rubber end. Available is
Standard diameters 1 1/2", 1 3/4", 2", 2 1/2", and 3", Std lengths 1 &
2 ft, longer upon request.
|
Inflatable Grout Packers
Inflatable packers are available in diameter sizes of 1"- 2", 2"- 3", 3"-
6", 4"- 7" and 5"- 8". Lengths range from 10” up to five feet or
more. With their sliding head design, they have the ability to double
in size from their run-in diameter and typically furnish a longer seal
than that of a mechanical packer. These packers have integral tube
scrapers that remove excess grout that has adhered to the outside of the
center tube and work each time the packer is deflated. |
 |
|
|
|
Hand Grout Mixer
A portable, electric powered, grout mixer. The powerful
gear driven, hand held mixer is a perfect compliment to the CG050M and
CG050 grout pumps. Eliminate less efficient drill mixers and blend
batches of up to 8 gallons, decreasing your mixing time and saving labor
costs. Lightweight, yet durable this high performance mixer utilizes
a powerful heavy-duty 1 HP motor and operates on 110-120 volts. The
extended shaft and ergonomic grip allow the operator to stand upright minimizing
back strain during mixing. A variable speed drive delivers just the
right amount of power, virtually eliminating splashing. |
Grout Header
Grout headers are use to control pressure during grout injection.
The headers use regulating valves and a pressure gauge to bypass grout
back to the agitator tank. Headers are available for 0-30 psi and
0-100 psi with 1" or 1 1/4" camlock fittings.
|
Mud Balance With Marsh Funnel
The Mud Balance provides a simple method for the accurate
determination of mud density. Drilling mud temperature does not affect
the accuracy of readings. Durable, break resistant construction.
Consists of a base, graduated arm and cup, lid, knife edge, rider, built
in spirit level, and a counterweight. Plastic carrying case also provided.
|
|
|
|
Single Water Batcher
Manually operated water batcher with adjustable overflow pipe and quick
discharge slide gate dump valve. Various sizes available. Single
mix tank.
|
Double Water Batcher
Manually operated water batcher with adjustable overflow pipe and quick
discharge slide gate dump valve. Various sizes available for single
and double mix tanks.
|
High Pressure Recirculating Assembly
High pressure grout headers are use to control pressure during grout injection.
The headers use regulating valves and a pressure gauge to bypass grout
back to the agitator tank. Headers are available for 0-1000 psi 1"
locking style camlock fittings.
|
|
|
|
|
Air Compressor - 6 cfm @ 90 psi
Optional air compressor available on seleect models for spray applications
of coatings and bonded overlays.
|
Air Compressor - 13 cfm @ 90 psi
Optional high volume air compressor available on seleect models for spray
applications of vertical & overhead repair mortars.
|
Flow Cone with Stand
Measures the flowability of fluid hydraulic grout mixes.
Cast aluminum flow cone with stainless steel orifice. Meets specifications
ASTM 939-87 and U.S. Army Corps. of Engineers CRD-C 79-58. Optional
stand available.
|
